1
ห้อง MS Access / : เปิด access เข้า VBA แล้วมันปิดเอง
« เมื่อ: 28 ก.พ. 67 , 05:37:06 »
มันเกี่ยวกับโค้ด VBA ที่ใช้กับ Access 32bit แล้วเอาไปใช้กับเครื่องที่เป็น Access 64bit ป่าวคับ
โพสต์นี้ได้รับคำขอบคุณจาก: Krathok-man
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
ผมสร้าง code ดังนี้ เพื่อไม่ให้ Form BB_detail รับข้อมูล
[BB_detail].Form.AllowAdditions = False
[BB_detail].Form.AllowEdits = False
[BB_detail].Form.AllowDeletions = False
แต่มันยังกด command btt ได้ จริงๆ ผมอยากให้ Disable ทั้งหมด คือสั่งอะไรไม่ได้เลย
เมื่อเกิดเหตุการณ์ มีวิธีอะไรบ้างครับ
Private Sub Form_Current()
Dim ctl As Control
For Each ctl In Me
If ctl.ControlType = acComboBox Then
ctl.Enabled = False
ctl.Locked = True
End If
If ctl.ControlType = acTextBox Then
ctl.Enabled = False
ctl.Locked = True
End If
If ctl.ControlType = acCommandButton Then
ctl.Enabled = False
End If
Next ctl
Forms![BB_detail].Form.AllowAdditions = False
Forms![BB_detail].Form.AllowEdits = False
Forms![BB_detail].Form.AllowDeletions = False
End Sub
acBoundObjectFrame | Bound object frame |
acCheckBox | Check box |
acComboBox | Combo box |
acCommandButton | Command button |
acCustomControl | ActiveX (custom) control |
acImage | Image |
acLabel | Label |
acLine | Line |
acListBox | List box |
acObjectFrame | Unbound object frame or chart |
acOptionButton | Option button |
acOptionGroup | Option group |
acPage | Page |
acPageBreak | Page break |
acRectangle | Rectangle |
acSubform | Subform/subreport |
acTabCtl | Tab |
acTextBox | Text box |
acToggleButton | Toggle button |
Shell "Notepad.exe " & "D:\Warning.txt", vbNormalFocus
เปิดแล้ว บังคับให้เต็มเจอครับ
มี Code ที่ทำให้เต็มเจอไหม
Shell "Notepad.exe " & "D:\Warning.txt", vbNormalFocus
Set oShell = CreateObject("WScript.Shell")
oShell.SendKeys "% x"
เช่น 65.00 อ่านว่า "sixty five bath" เป็นต้น จนถึงหลักล้าน
Public Function wsiSpellNumber(ByVal MyNumber)
Dim Bath, Stang, Temp
Dim DecimalPlace, Count
ReDim Place(9) As String
Place(2) = " Thousand "
Place(3) = " Million "
Place(4) = " Billion "
Place(5) = " Trillion "
' String representation of amount.
MyNumber = Trim(Str(MyNumber))
' Position of decimal place 0 if none.
DecimalPlace = InStr(MyNumber, ".")
' Convert Stang and set MyNumber to dollar amount.
If DecimalPlace > 0 Then
Stang = GetTens(Left(Mid(MyNumber, DecimalPlace + 1) & _
"00", 2))
MyNumber = Trim(Left(MyNumber, DecimalPlace - 1))
End If
Count = 1
Do While MyNumber <> ""
Temp = GetHundreds(Right(MyNumber, 3))
If Temp <> "" Then Bath = Temp & Place(Count) & Bath
If Len(MyNumber) > 3 Then
MyNumber = Left(MyNumber, Len(MyNumber) - 3)
Else
MyNumber = ""
End If
Count = Count + 1
Loop
Select Case Bath
Case ""
Bath = "No Bath"
Case "One"
Bath = "One Bath"
Case Else
Bath = Bath & " Bath"
End Select
Select Case Stang
Case ""
Stang = " and No Stang"
Case "One"
Stang = " and One Stang"
Case Else
Stang = " and " & Stang & " Stang"
End Select
wsiSpellNumber = Bath & Stang
End Function
' Converts a number from 100-999 into text
Function GetHundreds(ByVal MyNumber)
Dim result As String
If Val(MyNumber) = 0 Then Exit Function
MyNumber = Right("000" & MyNumber, 3)
' Convert the hundreds place.
If Mid(MyNumber, 1, 1) <> "0" Then
result = GetDigit(Mid(MyNumber, 1, 1)) & " Hundred "
End If
' Convert the tens and ones place.
If Mid(MyNumber, 2, 1) <> "0" Then
result = result & GetTens(Mid(MyNumber, 2))
Else
result = result & GetDigit(Mid(MyNumber, 3))
End If
GetHundreds = result
End Function
' Converts a number from 10 to 99 into text.
Function GetTens(TensText)
Dim result As String
result = "" ' Null out the temporary function value.
If Val(Left(TensText, 1)) = 1 Then ' If value between 10-19...
Select Case Val(TensText)
Case 10: result = "Ten"
Case 11: result = "Eleven"
Case 12: result = "Twelve"
Case 13: result = "Thirteen"
Case 14: result = "Fourteen"
Case 15: result = "Fifteen"
Case 16: result = "Sixteen"
Case 17: result = "Seventeen"
Case 18: result = "Eighteen"
Case 19: result = "Nineteen"
Case Else
End Select
Else ' If value between 20-99...
Select Case Val(Left(TensText, 1))
Case 2: result = "Twenty "
Case 3: result = "Thirty "
Case 4: result = "Forty "
Case 5: result = "Fifty "
Case 6: result = "Sixty "
Case 7: result = "Seventy "
Case 8: result = "Eighty "
Case 9: result = "Ninety "
Case Else
End Select
result = result & GetDigit _
(Right(TensText, 1)) ' Retrieve ones place.
End If
GetTens = result
End Function
' Converts a number from 1 to 9 into text.
Function GetDigit(Digit)
Select Case Val(Digit)
Case 1: GetDigit = "One"
Case 2: GetDigit = "Two"
Case 3: GetDigit = "Three"
Case 4: GetDigit = "Four"
Case 5: GetDigit = "Five"
Case 6: GetDigit = "Six"
Case 7: GetDigit = "Seven"
Case 8: GetDigit = "Eight"
Case 9: GetDigit = "Nine"
Case Else: GetDigit = ""
End Select
End Function
Option Compare Database
Public Declare Function GetSystemDefaultLCID Lib "kernel32" () As Long
Public Declare Function GetLocaleInfo Lib "kernel32" _
Alias "GetLocaleInfoA" _
(ByVal Locale As Long, _
ByVal LCType As Long, _
ByVal lpLCData As String, _
ByVal cchData As Long) As Long
Public Function GetUserLocaleInfo(ByVal dwLocaleID As Long, ByVal dwLCType As Long) As String
Dim sReturn As String
Dim r As Long
r = GetLocaleInfo(dwLocaleID, dwLCType, sReturn, Len(sReturn))
If r Then
sReturn = Space$(r)
r = GetLocaleInfo(dwLocaleID, dwLCType, sReturn, Len(sReturn))
If r Then GetUserLocaleInfo = Left$(sReturn, r - 1)
End If
End Function
Public Function mYear(ByVal yourDate As Date) As Long
mYear = Year(yourDate)
If GetUserLocaleInfo(GetSystemDefaultLCID(), &H1009) = 7 Then mYear = Year(yourDate)
End Function
Public Function bYear(ByVal yourDate As Date) As Long
bYear = Year(yourDate)
'If GetUserLocaleInfo(GetSystemDefaultLCID(), &H1009) <> 7 Then bYear = Year(yourDate) + 543
If GetUserLocaleInfo(GetSystemDefaultLCID(), &H1009) = 7 Then bYear = ((Year(yourDate) + 543) - 2500)
End Function
Function MonthNameEng(ByVal yourDate) As String
If Not IsNull(yourDate) Then
yourDate = Format(yourDate, "m")
Select Case yourDate
Case 1
MonthNameEng = "January"
Case 2
MonthNameEng = "February"
Case 3
MonthNameEng = "March"
Case 4
MonthNameEng = "April"
Case 5
MonthNameEng = "May"
Case 6
MonthNameEng = "June"
Case 7
MonthNameEng = "July"
Case 8
MonthNameEng = "August"
Case 9
MonthNameEng = "September"
Case 10
MonthNameEng = "October"
Case 11
MonthNameEng = "November"
Case 12
MonthNameEng = "December"
Case Else
MonthNameEng = ""
End Select
End If
End Function